ZMDI公司的ZSSC3170是集成了LIN和PWM接口的汽車傳感器信號調理器,最大模擬增益420,并具有擴展的失調補償.器件和LIN指標1.3 / 2.0 / 2.1兼容,數據轉換速率高達430Hz,電源電壓7-18V,ADC分辨率13-14位,輸出分辨率達12位,睡眠模式的電流消耗小于100uA.本文介紹了ZSSC3170主要特性, 方框圖和多種應用電路.
ZSSC3170: Automotive Sensor Signal Conditioner with LIN and PWM Interface
The ZSSC3170 is a CMOS integrated circuit for highly accurate amplification and sensor specific correction of bridge sensor signals. Featuring a maximum analog gain of 420, as well as extended offset compensation capabilities, the ZSSC3170 is adjustable to nearly all resistive bridge sensor types.
Digital compensation of offset, sensitivity, temperature drift, and nonlinearity is accomplished via a 16-bit RISC microcontroller. Conditioning coefficients are stored in an EEPROM certified for automotive applications.
Measured values are provided by one of the digital LIN or PWM interfaces. Each interface can support end-of-line calibration using the sensor output. Noise sensitivity is greatly reduced because the calibration equipment and the ZSSC3170 are mated digitally.
For quick and easy evaluation and support for calibrating prototypes, ZMDI offers the ZSSC3170 SSC Evaluation Kit, which includes evaluation hard-ware, SSOP20 samples, and software.
ZSSC3170主要特性:
Complies with LIN specifications 1.3/2.0/2.1
Configurable LIN publisher frame content
Data conversion rate of up to 430Hz fully utilizes the maximum LIN channel capacity of 20kbit/s
PWM high-side and low-side switches, support for LIN communication for end-of-line calibration
Digital compensation of offset, gain, temperature effects up to 2nd order, and nonlinearity up to 3rd order. Compensation of temperature sensor offset, gain, and nonlinearity up to 2nd order.
Internal or external temperature reference
Media temperature sensing by diode or RTD
Load dump protection of the LIN pin up to ±40V
Operating temperature range: -40 to 125Â℃
Extended operating temperature range: ≤150Â℃
Accuracy
±0.25% FSO @ -20 to 85Â℃
±0.50% FSO @ -40 to 125Â℃
±1.00% FSO @ -40 to 150Â℃
3 EEPROM words available for optional use data
ZSSC3170優勢:
Measurand and temperature signal available via one output pin
Compatible with nearly all resistive bridge inputs
No external trimming components required
Single-pass calibration minimizes calibration costs
End-of-line calibration using sensor output
Optimized for automotive environments with special protection circuitry, excellent electro-magnetic compatibility, and numerous diagnostic features
ZSSC3170物理特性:
Supply voltage: 7 to 18V
Current consumption in Sleep Mode: ≤ 100μA Input span: 1.8 to 267 mV/V
ADC resolution: 13 to 14 bit
Output resolution: up to 12-b
Package: SSOP20 or die
圖1.ZSSC3170方框圖
圖2.ZSSC3170 LIN壓力傳感器和溫度傳感器
圖3.ZSSC3170低邊開關PWM模式應用電路圖
圖4.ZSSC3170高邊開關PWM模式應用電路圖
圖5.ZSSC3170LIN模式應用電路圖
詳情請見:
http://www.zmdi.com/products/sensor-signal-conditioner/zssc3170/
