中圖分類號： TP274.2 文獻標識碼： A DOI：10.16157/j.issn.0258-7998.200178 中文引用格式： 鄒風華，王柱，錢秋妃,等. 基于FPGA的虛擬放射源系統(tǒng)[J].電子技術(shù)應(yīng)用，2020，46(9)：102-105. 英文引用格式： Zou Fenghua，Wang Zhu，Qian Qiufei，et al. Virtual radiation source system based on FPGA[J]. Application of Electronic Technique，2020，46(9)：102-105.
Virtual radiation source system based on FPGA
Zou Fenghua，Wang Zhu，Qian Qiufei，Xu Yueming，Dong Junqi
School of Physics and Technology，Wuhan University，Wuhan 430072，China
Abstract： Nuclear physics experiments,radiation medicine and other fields are inseparable from the radiation source and its detection. By using DAC, FPGA and direct digital synthesis(DDS)technology to build a virtual radiation source system,the types of radiation source and detector can be flexibly selected, and the relative distance and angle between radiation source and detector can be set. According to the experimental spectral line, the amplitude signal is transmitted at a certain frequency,and it enters the FPGA digital processing platform through the network port. FPGA receives the amplitude signal and processes it to get the pulse signal with specific detector characteristics. The 14 bit digital-to-analog conversion chip LTC1667 is used to convert the digital signal from FPGA to analog signal. Pulse amplitude analyzer is used to collect and analyze the pulse signal and obtain the energty spectrum through the corresponding software.The results show that the virtual radiation source can not only achieve the similar effect, but also have more flexibiliy,convenience and safe.
Key words : FPGA；virtual radiation source；direct digital synthesis；pulse signal
