</a>LED" title="LED">LED" title="LED">LED驅動器,設計用于RGB照明或LCD顯示器背光.支持正向電壓高達成3.8V的LED,工作電壓 2.7 V到5.5 V,四路電流可單獨編程,最大電流30mA,輸出電流精度 ±7%,通路間電流匹配度在 ±4%內.主要用在手機顯示器背光和RGB LED指示器驅動器.本文介紹了STP4CMP主要特性,框圖,典型應用電路及其所用元件,STP4CMP評估板及其電路圖,STEVAL-TLL012V1演示板主要特性和電路圖,材料清單.
The STP4CMP is a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting. The STP4CMP works off a battery with an input voltage between 2.7 V - 5.5 V. The device generates regulated current sinks with high absolute and channel-tochannel accuracy to drive up to 4 LEDs. It can support LEDs with forward voltage as high as 3.8 V. The current sink for each channel can be set with 4 individual external resistors. Each channel is controlled independently. The PWM control can be applied directly to the 4 EN (enable) pins to provide brightness control. When enabled, the charge pump, which uses a small ceramic bucket capacitor between C1P and C1N, operates to regulate the VOUT with a clamping voltage at typ.
5 V. The tiny QFN20 (1.8 x 3.2 mm) package allows the device to be also used for applications with space limitation.
STP4CMP主要特性:
■ Operating voltage range: VCC (opr) = 2.7 V to 5.5 V
■ Full RGB function support
■ 4-channel LED driver with individual ON/OFF control directly from input pins
■ Individual programmable output current for the 4 channels through 4 external resistors with a max. capability of 30 mA
■ Absolute output current accuracy of max. ±7% and channel-to-channel mismatch of max. ± 4%
■ Selectable charge pump enable/disable
■ Thermal protection
■ Small QFN20 (1.8 x 3.2 mm) package
STP4CMP應用:
■ Mobile phone display backlighting
■ RGB LED indicator drivers
圖1.STP4CMP方框圖
圖2.STP4CMP應用框圖
圖2應用電路外接元件:
圖3.STP4CMP評估板外形圖
圖4.STP4CMP評估板電路圖
STEVAL-TLL012V1演示板
The STEVAL-TLL012V1 demonstration board demonstrates the performance of the STP4CMP, a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting.
This device works off a battery with an input voltage between 2.7 V - 5.5 V. The device generates regulated current sinks with high absolute and channel-to-channel accuracy to drive up to 4 LEDs. It can support LEDs with forward voltage as high as 3.8 V.
The current sink for each channel can be set with 4 individual external resistors. Each channel is controlled independently.
The PWM control can be applied directly to the 4 EN (enable) inputs to provide brightness control.
STEVAL-TLL012V1演示板主要特性:
■ Operating voltage range: 2.7 V to 5.5 V
■ Full RGB function support
■ 4-channel LED driver with individual ON/OFF control directly from input pins
■ Individual programmable output current for the 4 channels through 4 external resistors with a max. capability of 30 mA
■ Absolute output current accuracy of max. ±7% and channel-to-channel mismatch of max. ± 4%
■ Selectable charge pump enable/disable
■ Thermal protection
■ RoHS compliant
圖5.STEVAL-TLL012V1演示板外形圖
圖6.STEVAL-TLL012V1演示板電路圖
STEVAL-TLL012V1演示板材料清單:
詳情請見:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00236423.pdf
和
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/DM00056350.pdf
The STP4CMP is a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting. The STP4CMP works off a battery with an input voltage between 2.7 V - 5.5 V. The device generates regulated current sinks with high absolute and channel-tochannel accuracy to drive up to 4 LEDs. It can support LEDs with forward voltage as high as 3.8 V. The current sink for each channel can be set with 4 individual external resistors. Each channel is controlled independently. The PWM control can be applied directly to the 4 EN (enable) pins to provide brightness control. When enabled, the charge pump, which uses a small ceramic bucket capacitor between C1P and C1N, operates to regulate the VOUT with a clamping voltage at typ.
5 V. The tiny QFN20 (1.8 x 3.2 mm) package allows the device to be also used for applications with space limitation.
STP4CMP主要特性:
■ Operating voltage range: VCC (opr) = 2.7 V to 5.5 V
■ Full RGB function support
■ 4-channel LED driver with individual ON/OFF control directly from input pins
■ Individual programmable output current for the 4 channels through 4 external resistors with a max. capability of 30 mA
■ Absolute output current accuracy of max. ±7% and channel-to-channel mismatch of max. ± 4%
■ Selectable charge pump enable/disable
■ Thermal protection
■ Small QFN20 (1.8 x 3.2 mm) package
STP4CMP應用:
■ Mobile phone display backlighting
■ RGB LED indicator drivers
圖1.STP4CMP方框圖
圖2.STP4CMP應用框圖
圖2應用電路外接元件:
圖3.STP4CMP評估板外形圖
圖4.STP4CMP評估板電路圖
STEVAL-TLL012V1演示板
The STEVAL-TLL012V1 demonstration board demonstrates the performance of the STP4CMP, a charge pump based 4-channel LED driver designed for RGB illumination or LCD display backlighting.
This device works off a battery with an input voltage between 2.7 V - 5.5 V. The device generates regulated current sinks with high absolute and channel-to-channel accuracy to drive up to 4 LEDs. It can support LEDs with forward voltage as high as 3.8 V.
The current sink for each channel can be set with 4 individual external resistors. Each channel is controlled independently.
The PWM control can be applied directly to the 4 EN (enable) inputs to provide brightness control.
STEVAL-TLL012V1演示板主要特性:
■ Operating voltage range: 2.7 V to 5.5 V
■ Full RGB function support
■ 4-channel LED driver with individual ON/OFF control directly from input pins
■ Individual programmable output current for the 4 channels through 4 external resistors with a max. capability of 30 mA
■ Absolute output current accuracy of max. ±7% and channel-to-channel mismatch of max. ± 4%
■ Selectable charge pump enable/disable
■ Thermal protection
■ RoHS compliant
圖5.STEVAL-TLL012V1演示板外形圖
圖6.STEVAL-TLL012V1演示板電路圖
STEVAL-TLL012V1演示板材料清單:
詳情請見:
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATASHEET/CD00236423.pdf
和
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/DATA_BRIEF/DM00056350.pdf
本站內容除特別聲明的原創文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創文章及圖片等內容無法一一聯系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯系電話：010-82306118；郵箱：aet@chinaaet.com。