</a>LED" title="LED">LED" title="LED">LED驅動器,可用于需要模擬調光的手機顯示器和3D顯示屏.輸入電壓2.4V-5.5V,提供4路40mA電流和高達26V電壓,電流匹配±2.5% ,具有故障保護,主要用在平板電腦,筆記本PC和智能手機顯示器LED背光,移動顯示器2D或3D LED背光.本文介紹了ISL97691主要特性,方框圖,典型應用電路圖,PCB布局參考圖和故障保護電路圖.
The ISL97691 is Intersil’s highly integrated 4 channel LED driver for single cell Li-Ion battery operated mobile displays requiring analog dimming, and for 3D mobile display applications. It drives four 40mA channels of LEDs up to 26V from an input supply 2.4V to 5.5V. The ISL97691 will also drive 60mA channels up to 21V at 30% duty for high peak current 3D modes.
The ISL97691 provides 4 channels of current with 2 independent analog dimming controls and 2 independent PWM dimming controls. Channels 1 and 2 form one channel group and channels 3 and 4 form the other channel group. Each channel group’s analog dimming is controlled through 1-Wire communication with 6-bit resolution and each channel group’s PWM dimming is controlled by a separate PWM input. This unique setup allows 2D or 3D application where independent and dynamic channel control of LED peak current and PWM dimming duty cycle are possible. The ISL97691 employs adaptive boost architecture that allows ultra low dimming duty cycle as low as 0.005% at 100Hz dimming frequency.
The driver features dynamic headroom control that monitors the highest LED forward voltage string and uses its feedback signal for the minimum output regulation.
The ISL97691 incorporates extensive protection functions including string open and short circuit detections, OVP, and OTP. The switching frequency can be adjusted from 400kHz to 1.5MHz.
The device is offered in a 16 Ld TQFN 3x3mm package and can operate in ambient temperature from -40℃ to +85℃.
ISL97691主要特性:
• Operating Input Voltage 2.4V to 5.5V - No Need for Additional Supplies
• 4 x 60mA (Note 1) and 4 x 40mA (Note 2) LED Current
• 2 Groups of Independent Analog and PWM Current Controls
- 1-Wire Interfaces for 6-bit Analog Dimming
- PWM Inputs for PWM Dimming
- 0.005% Minimum PWM Dimming Duty Cycle at 100Hz
• Low 1mA Operating Current
• ±2.5% Current Matching
• Adjustable Switching Frequency from 400kHz to 1.5MHz
• Fault Protection
- OVP, OTP, Channel Open/Short Circuit Protections
ISL97691應用:
• Tablet, Notebook PC and Smart Phone Displays LED Backlighting
• Mobile Displays for 2D or 3D LED Backlighting
圖1.ISL97691方框圖
圖2.ISL97691典型應用電路圖
圖3.ISL97691 PCB布局參考圖
圖4.ISL97691簡化故障保護電路圖
詳情請見:
http://www.intersil.com/content/dam/Intersil/documents/fn78/fn7840.pdf
The ISL97691 is Intersil’s highly integrated 4 channel LED driver for single cell Li-Ion battery operated mobile displays requiring analog dimming, and for 3D mobile display applications. It drives four 40mA channels of LEDs up to 26V from an input supply 2.4V to 5.5V. The ISL97691 will also drive 60mA channels up to 21V at 30% duty for high peak current 3D modes.
The ISL97691 provides 4 channels of current with 2 independent analog dimming controls and 2 independent PWM dimming controls. Channels 1 and 2 form one channel group and channels 3 and 4 form the other channel group. Each channel group’s analog dimming is controlled through 1-Wire communication with 6-bit resolution and each channel group’s PWM dimming is controlled by a separate PWM input. This unique setup allows 2D or 3D application where independent and dynamic channel control of LED peak current and PWM dimming duty cycle are possible. The ISL97691 employs adaptive boost architecture that allows ultra low dimming duty cycle as low as 0.005% at 100Hz dimming frequency.
The driver features dynamic headroom control that monitors the highest LED forward voltage string and uses its feedback signal for the minimum output regulation.
The ISL97691 incorporates extensive protection functions including string open and short circuit detections, OVP, and OTP. The switching frequency can be adjusted from 400kHz to 1.5MHz.
The device is offered in a 16 Ld TQFN 3x3mm package and can operate in ambient temperature from -40℃ to +85℃.
ISL97691主要特性:
• Operating Input Voltage 2.4V to 5.5V - No Need for Additional Supplies
• 4 x 60mA (Note 1) and 4 x 40mA (Note 2) LED Current
• 2 Groups of Independent Analog and PWM Current Controls
- 1-Wire Interfaces for 6-bit Analog Dimming
- PWM Inputs for PWM Dimming
- 0.005% Minimum PWM Dimming Duty Cycle at 100Hz
• Low 1mA Operating Current
• ±2.5% Current Matching
• Adjustable Switching Frequency from 400kHz to 1.5MHz
• Fault Protection
- OVP, OTP, Channel Open/Short Circuit Protections
ISL97691應用:
• Tablet, Notebook PC and Smart Phone Displays LED Backlighting
• Mobile Displays for 2D or 3D LED Backlighting
圖1.ISL97691方框圖
圖2.ISL97691典型應用電路圖
圖3.ISL97691 PCB布局參考圖
圖4.ISL97691簡化故障保護電路圖
詳情請見:
http://www.intersil.com/content/dam/Intersil/documents/fn78/fn7840.pdf
本站內容除特別聲明的原創(chuàng)文章之外，轉載內容只為傳遞更多信息，并不代表本網站贊同其觀點。轉載的所有的文章、圖片、音/視頻文件等資料的版權歸版權所有權人所有。本站采用的非本站原創(chuàng)文章及圖片等內容無法一一聯(lián)系確認版權者。如涉及作品內容、版權和其它問題，請及時通過電子郵件或電話通知我們，以便迅速采取適當措施，避免給雙方造成不必要的經濟損失。聯(lián)系電話：010-82306118；郵箱：aet@chinaaet.com。